When the Job Is 26 Meters High, “Almost Enough Reach” Is Not Enough

High-altitude work becomes expensive when the access equipment cannot put operators exactly where they need to be.

Imagine a steel structure, factory façade or large commercial building where the maintenance point is high above the ground—and several meters away from the nearest suitable machine position.

A lift may have enough vertical height but insufficient horizontal outreach.

The result?

The operator lowers the platform, moves the machine, sets up the next position and raises the boom again.

For contractors, rental companies and maintenance teams, every unnecessary repositioning means more time spent reaching the job instead of completing it.

The HXT T26 electric telescopic boom lift is designed to address exactly this type of high-reach challenge.

With a 26m maximum working height, 24m maximum platform height, 19.6m maximum working range and 19m maximum crossing height, the T26 combines vertical and horizontal access in one electric aerial platform.

It is not simply about going higher.

It is about reaching the right position more efficiently.

26m Up. 19.6m Out. One Machine for More Work Positions.

Customer Pain Point: “The Height Is Enough, But I Still Cannot Reach the Work Area.”

Maximum working height is often the first specification buyers compare.

But it should not be the only one.

On real jobsites, the chassis cannot always be parked directly underneath the work point.

Obstacles may include:

· Building structures

· Construction materials

· Landscaping

· Production equipment

· Restricted ground areas

· Existing infrastructure

This is where horizontal outreach becomes important.

The HXT T26 Solution

The T26 provides:

26m Maximum Working Height
24m Maximum Platform Height
19.6m Maximum Working Range
19m Maximum Crossing Height

These specifications allow the boom to extend both upward and outward, helping operators approach difficult elevated positions while keeping the chassis at an appropriate working location.

For building façades, steel structures and industrial facilities, this can help reduce unnecessary repositioning during multi-point work.

Bring the Crew, Tools and Materials Up Together

Customer Pain Point: Limited Platform Capacity Can Create Extra Trips

Reaching the work point is only half of the job.

The platform may also need to carry operators, tools and installation materials.

When capacity or working space is limited, crews may need additional lifting cycles or alternative arrangements to move what they need to the work position.

The HXT T26 provides a 300kg/460kg maximum platform capacity, depending on the applicable operating configuration.

Its platform measures 2.44 × 0.91m, and the supplied specification lists accommodation for 2–3 platform occupants.

The platform also provides 160° rotation.

That means the operator can adjust the basket position as the work progresses instead of relying entirely on repositioning the complete chassis.

More Space. More Capacity. More Positioning Flexibility.

This combination makes the T26 suitable for jobs involving:

installation tools, electrical equipment, maintenance materials, structural components and multiple operators.

Stop Repositioning the Entire Machine for Every New Work Point

Customer Pain Point: Large Jobsites Require Constant Position Changes

Aerial work rarely happens at just one point.

On a factory, warehouse or construction project, operators may need to move from one structural column to another, then continue along a façade or roofline.

Constantly lowering and repositioning equipment reduces productive working time.

The HXT T26 combines chassis mobility with a 360° continuous turntable rotation, allowing the upper structure to access different directions around the machine.

Its mobility specifications include:

0–5.5km/h stowed travel speed

0–1.1km/h working travel speed

40% gradeability in stowed condition

0.28m center ground clearance

4×2 drive and steer

36 × 14-20 tires 

The machine also uses a floating steering axle with a dual-cylinder axle balance system. According to the supplied documentation, the system allows the four wheels to maintain contact according to road conditions while travelling and automatically locks for elevated operation.

Why Does This Matter to the Customer?

Because a boom lift should not only reach the job.

It also needs to move efficiently to the next one.

Electric Power Without Giving Up High-Reach Capability

Customer Pain Point: Diesel Noise and Exhaust Are Not Ideal for Every Jobsite

High-reach equipment is increasingly used not only on open construction sites, but also around industrial plants and other environments where noise and point-of-use emissions matter.

The HXT T26 is powered by an 80V/412Ah battery system rather than a conventional combustion engine.

Its electric and hydraulic configuration includes:

Battery: 80V / 412Ah

Drive Motors: 5.4kW × 4

Pump Motor: 24kW

Hydraulic System Capacity: 160L

Control Voltage: 12VDC

Full Proportional Control 

The supplied documentation describes the electric platform as providing zero emissions at the point of use, low noise and traceless driving, making it suitable for clean working environments.

This makes the T26 especially attractive to customers who want the reach of a large straight boom while preferring electric operation.

Confidence at Height Requires More Than Just a Strong Boom

For professional buyers, working height is important—but machine control and protection systems also matter.

The HXT T26 incorporates multiple operating and protection functions, including:

Emergency descent system
Emergency stop system
Anti-compression protection
Automatic platform leveling
Tilt protection
Platform weighing system
Steering angle sensor
Axle balance system
Smart speed control 

The steering angle sensor automatically adjusts travel motor speed to support smoother travelling.

A pressure sensor on the main valve automatically adjusts pressure to help provide smoother lifting and lowering movement.

The machine also includes a 24V/1.6kW emergency motor, which can be used for emergency lowering if normal lowering is unavailable.

These features help make the T26 more than simply a long boom on a mobile chassis.

They support the control, positioning and operating requirements expected from professional aerial work equipment.

One High-Reach Platform, Multiple Professional Applications

The HXT T26 is designed for customers whose work cannot stop at ordinary access heights.

Its combination of long vertical reach, horizontal outreach, platform capacity and electric operation makes it particularly relevant for:

Steel Structure Construction
Reach beams, columns and elevated connection points.

Industrial Plant Maintenance
Access elevated equipment, pipelines and structural areas.

Building Façade Work
Reach windows, exterior walls and installation points without positioning directly underneath every work location.

Electrical & Lighting Installation
Carry personnel and necessary tools to elevated installation areas.

Warehouse & Factory Maintenance
Electric operation is particularly useful where lower operating noise and zero point-of-use emissions are preferred.

Large Construction Projects
Move between different working positions while using the long telescopic boom to cover a larger working area.

Why Buyers Choose the HXT T26

A customer looking for a 26-meter boom lift usually does not simply need “26 meters.”

They need to solve a worksite problem.

They need to reach an area that smaller machines cannot reach.

They need enough horizontal outreach to work around obstacles.

They need enough platform capacity for people and equipment.

They need mobility between different work positions.

And increasingly, they may want electric operation without sacrificing professional high-reach performance.

That is where the HXT T26 high reach aerial platform becomes valuable.

26m working height gives you vertical access.

19.6m working range helps you reach farther.

300/460kg platform capacity supports demanding professional work.

360° continuous turntable rotation provides positioning flexibility.

80V/412Ah electric power provides zero point-of-use emissions and lower-noise operation.

Reach Higher. Reach Farther. Finish More Work from Every Position.

The HXT T26 is built for customers who need more than height—they need productive access at height.

FAQ

1. How high can the HXT T26 electric boom lift reach?

The HXT T26 has a 26m maximum working height and a 24m maximum platform height, making it suitable for demanding high-access projects.

2. What is the horizontal reach of the HXT T26?

The maximum specified working range is 19.6m, while the maximum crossing height is 19m. This combination provides both vertical and horizontal access.

3. How much weight can the HXT T26 platform carry?

The maximum lift capacity is specified as 300kg/460kg, depending on the applicable operating configuration. The platform measures 2.44 × 0.91m and is specified for 2–3 occupants.

4. Is the HXT T26 battery powered?

Yes. The T26 uses an 80V/412Ah battery, four 5.4kW drive motors and a 24kW pump motor.

5. What safety and control features does the HXT T26 include?

The supplied configuration includes emergency descent, emergency stop, anti-compression protection, automatic platform leveling, tilt protection, a weighing system, axle balance system and smart speed control, among other functions.