HXT1.2C Mini Self Loading Concrete Mixer for Restricted Jobsites

Small concrete projects often lose time because aggregate loading, mixing and transport are handled by separate equipment. The HXT1.2C self loading concrete machine combines these stages on one compact mobile chassis. It loads raw materials with a front bucket, mixes them in an onboard drum, carries the fresh mix across the site and positions it close to the pour location. With a rated yield of 1.2 m³ per batch, the machine is intended for practical daily production where a full-size batching plant or large mixer truck would be inefficient.

The 1800 mm overall width is a major advantage for village roads, residential plots, farm construction and repair zones. Contractors searching for a mini self concrete mixer machine can use this model to work around narrow entrances and short travel routes while maintaining control over when each batch is produced.

How the Mixer Loading Cycle Reduces Equipment Dependence

The operating cycle starts at the bucket end of the vehicle. During mixer loading, the front bucket collects sand, stone or prepared aggregate and lifts it toward the mixing drum. Water is delivered from the 400 L onboard tank through a timed supply arrangement. Cement can then be introduced according to the site workflow and required mix design. The drum rotates at 13 rpm to combine the materials before the machine travels to the placement point.

This integrated arrangement reduces the need for a separate wheel loader, stationary mixer and short-distance transport vehicle. A single operator can coordinate material collection, mixing and movement from the enclosed cab. For dispersed or remote projects, that shorter equipment chain can make site organization considerably easier.

Key Specifications of the HXT1.2C

The HXT1.2C delivers 1.2 m³ of concrete per batch from a 1700 L geometric-capacity mixing drum. It uses a Yunnei 490 turbocharged engine rated at 55 kW and a ZL-265 gearbox with four forward and four reverse gears. Maximum travel speed is 30 km/h, while maximum gradeability is 30°. The torque-converter drive configuration supports smooth low-speed movement during loading and positioning.

Overall dimensions are 7300 × 1800 × 3450 mm, wheelbase is 2560 mm and curb weight is 4920 kg. The machine has a 4700 mm minimum turning radius and 280 mm minimum ground clearance. Fuel-tank capacity is 63 L, total hydraulic-system capacity is 63 L and the onboard water tank holds 400 L.

Technical Specification Table

Why Choose This Self Loading Concrete Machine

1. Compact access: An overall width of 1800 mm supports operation on narrow rural roads, housing plots and confined construction zones.

2. Integrated front bucket: Aggregate can be collected directly without arranging a separate loading machine for every batch.

3. Mobile mixing: The drum continues the mixing cycle while the unit relocates between the material pile and the placement area.

4. Practical turbo power: The 55 kW Yunnei engine provides power for travel, loading and hydraulic functions while keeping the machine compact.

5. Onboard water system: A 400 L water tank and timed supply simplify repeatable site batching where piped water may not be available beside the pour.

6. Enclosed cab and 4WD chassis: Operator protection, clear glazing and jobsite mobility support everyday use in changing site conditions.

Applications for a Mini Self Loading Cement Truck

Although buyers sometimes search for a self loading cement truck, the HXT1.2C is more accurately described as a self-loading concrete mixer because it handles aggregate, water and cement to produce a finished concrete mix. Its small batch output suits village road repairs, drainage channels, residential foundations, farm buildings, landscaping, retaining walls, small precast work and utility projects.

The machine is particularly useful when concrete is required at several nearby points rather than in one continuous high-volume pour. Materials can be stored close to the project, mixed only when needed and delivered over short site distances. This helps reduce dependence on ready-mix delivery schedules and can limit waste caused by delayed placement.

What Determines Self Concrete Mixer Machine Price?

The final self concrete mixer machine price depends on more than nominal batch capacity. Engine configuration, weighing system, tire specification, cab equipment, electrical standard, optional camera, spare-parts package, shipping method and destination all affect the quotation. Market-specific certification and after-sales requirements may also change the final configuration.

When comparing offers, check whether the quoted machine includes the same engine power, gearbox, water tank, hydraulic components and accessories. A lower headline price may exclude weighing functions, tools, spare parts or export preparation. The most useful quotation is therefore based on the real jobsite, required daily output and destination rather than on capacity alone.

Self Loading Concrete vs. Conventional Site Mixing

Conventional small-site production may use a loader or manual labor to feed a stationary mixer, followed by wheelbarrows or another vehicle for transport. A self loading concrete solution brings those linked tasks onto one chassis. The operator moves from the aggregate pile to the mixing area and then to the formwork without repeatedly transferring materials between independent machines.

This approach is strongest where ready-mix access is unreliable, distances are short and batch demand changes during the day. It is not a replacement for every central batching plant. Large continuous pours may still require higher-output equipment, while the HXT1.2C is optimized for flexible small-batch production and access-sensitive projects.

How to Select the Right Self Loading Concrete Machine

Before ordering, confirm the daily concrete requirement, site access width, terrain, aggregate size, travel distance and preferred batch frequency. A 1.2 m³ machine is attractive when mobility and compact access matter more than maximum single-batch volume. For larger road, bridge or commercial projects, a higher-capacity model may deliver better productivity.

Also share the destination port, local voltage requirements, expected working temperature and any preferred weighing or monitoring options. These details help match the machine configuration, spare-parts list and shipping plan to the application.

Request a Quotation for the HXT1.2C

The HXT1.2C offers a compact route to mechanized on-site concrete production. Its 1.2 m³ batch output, 55 kW turbocharged engine, 400 L water tank and narrow 1800 mm body make it suitable for dealers, contractors and rental fleets serving smaller projects.

Send us your application, required daily output and destination port to receive a detailed configuration and quotation. We can also compare the HXT1.2C with larger self-loading mixer models so that the selected capacity matches the real production target.