Compact On-Site Concrete Production

The HXT2.6C self batching concrete truck combines aggregate loading, water dosing, mixing and short-distance transport in one compact machine. With a rated concrete yield of 2.6 m³ per batch, it is designed for contractors who need flexible production without coordinating a separate wheel loader, stationary mixer and transport vehicle.

Its size and output make it especially practical for drainage channels, small roads, foundations, farm structures, municipal repairs and remote building work. Materials can be organized near the work area, loaded with the front bucket and mixed directly on site, helping the crew respond to changing pour locations and daily demand.

How the Integrated Mixing Cycle Works

The front hydraulic bucket collects sand and aggregate and raises them into the mixing system. Water is supplied from the 500 L onboard tank and controlled by a time relay. The drum mixes the measured materials at approximately 13–20 rpm, while the mobile chassis can reposition the batch close to the pour.

Because loading, mixing and movement are handled by one self concrete mixer truck, fewer support machines and operators may be required. Actual concrete quality still depends on a verified mix design, aggregate moisture correction, weighing calibration, material quality and correct operating procedures.

Why Choose the HXT2.6C Self Loading Mixer?

The 2.6 m³ batch size offers a useful balance between compact maneuverability and practical output. A 2650 mm wheelbase, 5300 mm minimum turning radius and 380 mm ground clearance support movement on typical construction access roads and confined work areas. Maximum speed is listed at 30 km/h and maximum gradeability at 30°, subject to load, traction, surface stability and safe operating limits.

Power comes from a 78 kW Yuchai 4102 turbocharged engine. The torque-converter drive and ZL-280 power-shift gearbox provide four forward and four reverse gears. The hydraulic system uses an HJ80-43 reducer, CBG9 2050/2032 pump and HYTEK motor according to the supplied configuration.

Integrated Operating Advantages

The self-loading bucket reduces dependence on a separate loader. Hydraulic controls assist loading and discharge operations, while an electronic weighing option can help the operator monitor material quantities. A vibration pump is intended to reduce bridging caused by wet sand or gravel, and automatic hydraulic braking supports practical site operation.

The 4100 L geometrical drum produces a rated 2.6 m³ batch and can rotate through 270° for flexible positioning. Six spiral blades and eight internal auxiliary blades are designed to improve material movement inside the drum. Dual water-supply capability allows use of the onboard tank or an external water source, reducing interruptions when site water access changes.

Cab features may include hydraulic pilot controls, an electronic scale, air conditioning, a shock-absorbing seat and wide visibility. A sealed rotating support with dust-control details is designed to reduce contamination and uneven gear wear in demanding environments.

HXT2.6C Technical Specifications

Self Loading Concrete Mixer Machine Price

The self loading concrete mixer machine price depends on more than nominal batch capacity. Engine configuration, electronic weighing, cab equipment, hydraulic component selection, tire specification, certifications, spare-parts package and optional attachments all influence the quotation. Freight, destination port, import duties and local delivery must also be considered when comparing landed cost.

When requesting a self loading mixer for sale, provide the project type, required daily output, site gradient, access width, destination and preferred configuration. A clear quotation should state the included accessories, warranty, commissioning support, production lead time and shipping basis. Comparing identical scopes is more reliable than comparing headline prices alone.

Applications for a 2.6 m³ Mobile Mixer

The HXT2.6C can serve rural housing, foundations, farm buildings, drainage works, culverts, road maintenance, retaining walls, industrial yards and water-conservancy projects. On dispersed sites, it can load aggregate from organized stockpiles, mix during repositioning and bring each batch close to the active work zone.

Buyers searching for a self loading cement mixer for sale should check whether the machine dimensions—approximately 7100 × 2750 × 4100 mm—and 7800 kg curb weight suit the transport route, jobsite entrances, unloading method and local road limits. Adequate turning space, stable ground and safe separation from workers remain essential.

What to Confirm Before Ordering

Confirm the concrete recipe, aggregate grading, maximum aggregate size, water source, ambient temperature, daily volume and distance between stockpile and pour. Also check local emissions rules, required certificates, available service support and the operator training plan.

Contact HXT Machinery for the current configuration, production schedule and destination-specific quotation. Share the application, expected output, terrain and delivery location so the recommended machine setup and shipping plan can be prepared accurately.

Frequently Asked Questions

What is the rated concrete output?

The supplied specification lists 2.6 m³ of concrete per batch from a 4100 L geometrical drum.

Which engine powers the HXT2.6C?

The standard specification lists a Yuchai 4102 turbocharged engine rated at 78 kW.

How much water can the machine carry?

The onboard water tank capacity is 500 L, with timed control and support for an external water source.

What determines the final price?

Configuration, weighing and cab options, certification, spare parts, freight and destination costs all affect the final quotation.

What information is needed for a quotation?

Provide the project, daily output, terrain, access dimensions, destination, certification needs and preferred options.