HXT5.5C Self Loading Concrete Mixer Price – 5.5 m³ Mixer Truck

Introduction

The HXT5.5C is a high-capacity self loading concrete mixer truck designed to combine aggregate loading, water dosing, mixing, short-distance transport and controlled discharge in one mobile machine. Its rated concrete yield of 5.5 m³ per batch makes it suitable for contractors who need more output than a compact mixer but still want the flexibility of producing concrete directly at the jobsite.

Instead of coordinating a wheel loader, a stationary mixer and a separate transport vehicle, the operator can complete the full batching cycle with one machine. This integrated workflow is particularly useful on roadworks, foundations, drainage projects, industrial yards, rural infrastructure and remote sites where ready-mix delivery may be costly, delayed or difficult to arrange.

How the HXT5.5C Works

The front hydraulic bucket collects sand, gravel and other batching materials, then lifts them into the mixing system. The onboard water tank and timed water-supply control support repeatable dosing, while the rotating drum mixes the batch during stationary operation or movement around the site. After mixing, the drum can rotate through 270° to position the front discharge area more conveniently for the pour.

On this machine, discharge is located at the front—the same end as the cab and loading bucket. The bucket is raised to clear the working area, and concrete leaves through the short discharge chute beneath it. The rear engine and water-tank end is not the discharge side. This layout allows the operator to approach forms, channels or pouring points from the front while maintaining direct visibility from the cab.

Why Choose a 5.5 m³ Self Loading Cement Mixer?

A 5.5 m³ self loading cement mixer offers a practical balance between batch output and jobsite mobility. The larger batch size can reduce the number of cycles required for medium-scale pours, while the four-wheel mobile chassis can move the mixed concrete between separated work areas. This can be more efficient than relying on small mixers when the daily volume is substantial, especially where access conditions rule out a fixed batching plant.

The HXT5.5C uses a 92 kW Yuchai or Weichai 6105 turbocharged engine, a torque-converter drive system and a ZL-428 gearbox with four forward and four reverse gears. Maximum speed is listed at 42 km/h, maximum gradeability at 45°, and minimum ground clearance at 380 mm. These figures support travel and maneuvering on typical construction terrain, although actual performance depends on load, surface condition, gradient and operating practice.

Integrated Features and Operating Advantages

The 7800 L geometrical drum capacity provides a rated yield of 5.5 m³ per batch, and the drum rotates at approximately 20 rpm. Internal spiral blades are designed to move material through the mixing zone and promote an even batch. The hydraulic drum rotation and 270° positioning range give the operator flexibility when aligning the front discharge chute with the required pouring area.

An 850 L onboard water tank supports independent operation where a fixed water connection is not close to the pour. The machine also uses hydraulic pilot controls for practical operation from the cab. The supplied feature configuration includes automatic hydraulic discharge, a vibration pump intended to reduce bridging or sticking in wet aggregate, and a sealed rotating support designed to help limit dust entry and uneven gear wear.

The cab can be configured with an electronic weighing display, hydraulic control scale, air conditioning, shock-absorbing seating and wide visibility. The weighing system helps the operator monitor loaded quantities, but concrete quality still depends on the approved mix design, moisture correction, cement and aggregate quality, calibration and consistent operating procedures.

HXT5.5C Technical Specifications

Note: Specifications are based on the supplied configuration sheet and must be reconfirmed in the final quotation and technical agreement.

Self Loading Concrete Mixer Price: What Determines the Quotation?

A reliable self loading concrete mixer price cannot be based on batch capacity alone. Final cost changes with the selected engine brand, weighing system, cab equipment, tire specification, hydraulic components, optional attachments, certification, paint requirements and spare-parts package. Delivery country, shipping method, port charges and local import costs also affect the total landed investment.

For an accurate quotation, provide the project type, required daily concrete output, destination, site gradient, road or access limits, preferred engine, local emissions or certification requirements and expected working hours. Buyers comparing quotations should confirm whether the price includes standard tools, commissioning support, spare parts, warranty terms, packing and freight. A lower headline price may not represent the same configuration or delivery scope.

Typical Applications

As a self loading mobile concrete mixer, the HXT5.5C can serve road and bridge works, concrete drainage channels, culverts, housing foundations, factory yards, retaining walls, farm buildings, water-conservancy projects and municipal construction. Its integrated loading and mixing cycle is valuable when pour points change frequently and when several smaller work zones must be supplied during the same shift.

For road projects, the machine can move alongside forms and discharge from the front into curbs, channels or prepared sections. At rural or remote sites, the front bucket can collect aggregate from organized stockpiles while the onboard water system supports batching away from fixed infrastructure. Site planning should still provide stable ground, sufficient turning space, suitable material storage and safe separation from workers.

What to Confirm Before Ordering

Before selecting a self concrete mixer, confirm that the 5.5 m³ batch size matches both the pour rate and the available material-handling space. The machine measures approximately 8450 × 3100 × 4580 mm, has a 3350 mm wheelbase, a 6200 mm minimum turning radius and an 11200 kg curb weight. These dimensions must be checked against jobsite gates, transport routes, unloading equipment and local road restrictions.

Also confirm aggregate size, concrete recipe, water availability, ambient temperature, maximum site slope and the distance between loading and pouring points. The commercial contract should state the final configuration and accessories, while the technical agreement should confirm key parameters, hydraulic components, engine option and after-sales support.

A Productive Mobile Solution for On-Site Concrete

The HXT5.5C brings loading, mixing, mobility and front discharge together in a single high-output platform. Its 5.5 m³ rated batch, 92 kW turbocharged engine, 850 L water tank and 270° drum positioning make it a strong option for contractors seeking flexible concrete production without building a permanent batching plant at every location.

Contact HXT Machinery for the latest configuration, current production schedule and destination-specific quotation. Share your project application, daily output target, terrain and delivery location so the recommended specification and shipping plan can be prepared accurately.

Frequently Asked Questions

What is the rated output of the HXT5.5C?

The supplied specification lists a rated concrete yield of 5.5 m³ per batch and a 7800 L geometrical drum capacity.

Where does the machine discharge concrete?

It discharges from the front end beside the cab. The short discharge chute is located beneath the raised front loading bucket; the rear engine and water-tank end is not the discharge side.

How is the self loading concrete mixer price calculated?

The quotation depends on engine choice, weighing and cab configuration, optional equipment, certification, spare parts, shipping method and destination.

Can the HXT5.5C work on sloped sites?

The specification lists maximum gradeability at 45°. Actual safe operation depends on load, surface stability, traction, slope geometry and the operating manual.

What details are needed for a formal quotation?

Provide the required batch capacity, project type, daily output, destination, site access, terrain, engine preference, certification needs and any required options.

Suggested Internal Links

Link this page to the self loading concrete mixer category, concrete equipment category, quotation/contact page, shipping guide and relevant project cases. Use descriptive anchor text such as “5.5 m³ self loading concrete mixer” instead of generic “click here.”